FleetGenius Transfer Station Compactors
- FleetGenius transfer station compactors are built for high volume waste streams packing directly into a transfer trailer.
- Available in 12 yd to 15 yd capacities.
- Hydraulic trailer hook up, platforms, and load chutes are optional and available upon request.
- Built to specifications to accommodate a new or existing site.
- FleetGenius Support Team provides turn key service with site analysis, recommended specifications, old equipment removal, new equipment delivery/installation, and training.
- Fast and cost-effective delivery ensured by our 8 distribution facilities, resulting in short lead times.
- What Is a Transfer Station Compactor?
Transfer station compactors are trash compactors that are specifically utilized at waste transfer stations. They handle extremely high volumes of waste and are engineered to pack materials directly into a transfer trailer, ensuring efficient handling and transport.
- Transfer Station Compactor Sizes and Specifications
FleetGenius manufactures Transfer Station Compactors in various sizes, allowing you to choose the one that best fits your requirements. Our available sizes include:
- 12-Cubic Yards (S1200 12YD Transfer Station Compactor)
- 13-Cubic Yards (S1300 13YD Transfer Station Compactor)
- 14-Cubic Yards (S1400 14YD Transfer Station Compactor)
- 15-Cubic Yards (S1500 15YD Transfer Station Compactor)
S1200 (12yd) Transfer Station Compactor
General Compactor Specifications:
- Dimensions – 317” overall length x 94” overall width x 77” overall height
- Clear top dimension – 106” x 80”
- Discharge – 80” wide x 60” high
- Ram Face – 80” wide x 48” high
- Ram Penetration – 30”
Performance Specifications:
- Ram Force – 142,000 lbs Normal / 230,000 Max Boost
- Ram Cylinders – (2) 7” bore x 5” rod cylinders x 141 ” stroke
- Ram Cycle Time – 32 seconds
Hydraulic Specifications:
- System Pressures – 1850 psi Normal / 3000 psi Max Boost
- Pump Capacity – 156 gpm multi stage (68/54/34)
- Reservoir Capacity – 350 gallons
- 5HP Cooling System w/Kidney Loop
- Reservoir capacity – 350gal with internal baffles to provide cooling capability without the use of a separate circulation pump and heat exchanger
Electrical Specifications:
- UL listed panel box (NEMA 3R or higher)
- Operation Voltage – TBD, 3ph
- Control Voltage – 120V . 24 VDC
- Motor – 60 HP, Tri-volt motor, 3 ph
- Power Unit Operating System – Koyo Click PLC
- Standard Controls on remote pendant control and power unit
- Standard Controls include key start switch, red mushroom E-stop button, reverse button, 80% full warning light
S1500 (15yd) Transfer Station Compactors
General Compactor Specifications:
- Dimensions – 354” overall length x 94” overall width x 85” overall height
- Clear top dimension – 126” x 80”
- Discharge – 82” wide x 62” high
- Ram Penetration – 39”
Performance Specifications:
- Ram Force – 142,000 lbs Normal / 230,000 Max Boost
- Ram Cylinders – (2) 7” bore x 5” rod cylinders x 165 ” long
- Ram Cycle Time – 35 seconds
Hydraulic Specifications:
- System Pressures – 1850 psi Normal / 3000 psi Max Boost
- Pump Capacity – 156 gpm multi stage (68/54/34) w/ Regen Hydraulics
- Reservoir Capacity – 350 gallons
- 5HP Cooling System w/Kidney Loop
- Reservoir capacity – 350gal with internal baffles to provide cooling capability without the use of a separate circulation pump and heat exchanger
Electrical Specifications:
- UL listed panel box (NEMA 3R or higher)
- Operation Voltage – TBD, 3ph
- Control Voltage – 120V . 24 VDC
- Motor – 60 HP, Tri-volt motor, 3 phase
- Power Unit Operating System – Koyo Click PLC
- Standard Controls on remote pendant control and power unit
- Standard Controls include key start switch, red mushroom E-stop button, reverse button, 80% full warning light