FleetGenius Transfer Station Compactors
- FleetGenius transfer station compactors are built for high volume waste streams packing directly into a transfer trailer
- Available in 12 yd to 15 yd capacities
- Hydraulic trailer hook up, platforms, and load chutes are optional and available upon request
- Built to specifications to accommodate a new or existing site
- FleetGenius Support Team provides turn key service with site analysis, recommended specifications, old equipment removal, new equipment delivery/installation, and training
Specifications
S1200 (12yd) Transfer Station Compactor
General compactor Specifications:
- Dimensions – 317” overall length x 94” overall width x 77” overall height
- Clear top dimension – 106” x 80”
- Discharge – 80” wide x 60” high
- Ram Face – 80” wide x 48” high
- Ram Penetration – 30”
Performance Specifications:
- Ram Force – 142,000 lbs Normal / 230,000 Max Boost
- Ram Cylinders – (2) 7” bore x 5” rod cylinders x 141 ” stroke
- Ram Cycle Time – 32 seconds
Hydraulic Specifications:
- System Pressures – 1850 psi Normal / 3000 psi Max Boost
- Pump Capacity – 156 gpm multi stage (68/54/34)
- Reservoir Capacity – 350 gallons
- 5HP Cooling System w/Kidney Loop
Reservoir capacity – 350gal with internal baffles to provide cooling capability without the use of a separate circulation pump and heat exchanger
Electrical Specifications:
- UL listed panel box (NEMA 3R or higher)
- Operation Voltage – TBD, 3ph
- Control Voltage – 120V . 24 VDC
- Motor – 60 HP, Tri-volt motor, 3 ph
- Power Unit Operating System – Koyo Click PLC
- Standard Controls on remote pendant control and power unit
- Standard Controls include key start switch, red mushroom E-stop button, reverse button, 80% full warning light
S1500 (15yd) Transfer Station Compactor
General compactor Specifications:
- Dimensions – 354” overall length x 94” overall width x 85” overall height
- Clear top dimension – 126” x 80”
- Discharge – 82” wide x 62” high
- Ram Penetration – 39”
Performance Specifications:
- Ram Force – 142,000 lbs Normal / 230,000 Max Boost
- Ram Cylinders – (2) 7” bore x 5” rod cylinders x 165 ” long
- Ram Cycle Time – 35 seconds
Hydraulic Specifications:
- System Pressures – 1850 psi Normal / 3000 psi Max Boost
- Pump Capacity – 156 gpm multi stage (68/54/34) w/ Regen Hydraulics
- Reservoir Capacity – 350 gallons
- 5HP Cooling System w/Kidney Loop
Reservoir capacity – 350gal with internal baffles to provide cooling capability without the use of a separate circulation pump and heat exchanger
Electrical Specifications:
- UL listed panel box (NEMA 3R or higher)
- Operation Voltage – TBD, 3ph
- Control Voltage – 120V . 24 VDC
- Motor – 60 HP, Tri-volt motor, 3 phase
- Power Unit Operating System – Koyo Click PLC
- Standard Controls on remote pendant control and power unit
- Standard Controls include key start switch, red mushroom E-stop button, reverse button, 80% full warning light
